Repeatable Blends with the Dual Smart Pod

Auto Mode

A Dual Smart Pod holds two different blends at once. Auto Mode is how you decide the balance between them without touching anything technical. The Dual Smart Pod is built and tested with Slyder Pro, and it is coming through licensed partners: they fill the pods and sell them. It is not sold on this store.

What is on the screen

• A mix dial showing the current split, for example 50% pod 1 and 50% pod 2.
• Buttons for Pod 1 and Pod 2, so you can check what each one holds.
• A slider for how much you take.
• An airflow slider as a percentage.

How it works

The mix starts at 50/50. Move it toward whichever pod you want more of, and Slyder Pro works out the temperature for the balance you picked.

If the two pods hold different blends, setting 70/30 toward pod 2 gives you a draw that leans toward pod 2. Set it back to 50/50 and you are balanced again.

You are not picking a preset. You are setting a proportion between two things you chose, and the device handles the rest.

Why is it useful

Same pods, same ratio, same amount, same output. That is the whole point. Once you find a combination that works, you write down the ratio and repeat it instead of guessing your way back to it.

It also makes experimenting cheap. Shift the proportion, try it, and if it does not work, shift it back.

A simple way to start

1. Tap Pod 1 and Pod 2 to confirm what each one holds.
2. Set the mix toward whatever you want more of today.
3. Pick how much you want for the session.
4. Adjust airflow to the draw you prefer.
5. Note the ratio when you find one that works, and reuse it.